PVI Industries PV500-43 manual

Double click on the debugging utility, “RUINET4” (Remote User Interface). The following screen will appear:

See the “ProtoCessor Mapping” document to ensure that the device is set up correctly with respect to Baud rate, Node Address, and Points which are configured in the device.

Select “O” for Connect Overview to see the number of messages on each protocol. If the ProtoCessor is communicating correctly with the device then the display will show Tx and Rx messages without any errors.

If there are errors on the ProtoCessor socket communications, then the points list in the CSV file will require editing until there are no errors. Each time the points are edited, the CSV will need to be re‐downloaded using Ruinet.

When communication between the device and the ProtoCessor is established the Field Side of the ProtoCessor may be connected to the appropriate device/software. Ensure that the Field Side parameters on the device/software are set up as per the “ProtoCessor Mapping” document.

Read and Write data from each side and make sure the ProtoCessor works as expected.

PVI Industries, LLC  P.O. Box 7124  Ft. Worth, TX 76111  1‐800‐433‐5654	PV500-43
	Page 6	7/10