PYLE Audio PLCD20CH Control and Function Keys, 1.+12V TO IGNITION, Antenna, Ground - /Back Up

Control and Function Keys

1 2 3 4

0.5A

RED

PINK

BLACK

BLACK

5A

BLACK

5 6 7

1.+12V TO IGNITION

Connect the red power wire (with in-line fuse holder) to a point in your vehicle’s fuse block that has power only when you turn the vehicle’s key to either the accessory (ACC) or START position.

2.ANTENNA

If your system does not have an RCA input jack, use the FM Modulator to covert CD Changer’s sound to FM signal. You can then hear it by tuning your vehicle system to FM frequency.

•Disconnect your vehicle’s antenna from your vehicle’s sound system, then connect the antenna to the FM Modulator’s large black antenna connector.

•Connect the FM Modulator’s antenna plug to your sound system’s antenna jack.

3.GROUND (–) / BACK UP

•Connect the black ground wire to a chassis ground, such as a metal screw attached to a metal part of the vehicle’s frame. Be sure that the screw is not insulated from the chassis by a plastic part.

•Connect the pink memory back up wire (with in-line fuse holder) to your vehicle battery’s positive (+) terminal or to a fuse that provides a continuous source of 12 volts.

21