-Error symbol on the display. Note:
If press RESET button(1), the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the disc socket.
Radio Operation
Selecting The Frequency Band
Press BAND button (14) shortly to select the desired band. The reception band will change between FM and AM.
Stereo/Mono
Press ST (15) or MO/ST on the remote control to select mono/stereo mode.
Local/Distant
Press ST
LOC (15) for several seconds or LO/DX on the remote control to select between local and distant stations.
LOCAL setting for reception of strong signal station, and DISTANT setting for reception of weaker signal stations.
Selecting Station
-Press preset
-Press 
for several seconds until
“MANUAL” appears on the display, and
then press 
button to select a station. If both buttons have not been pressed for several seconds, they will return to automatic seek mode .
Automatic Memory Storing & Program Scanning
-Automatic memory storing Press AS/PS button (17) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button.
-Program scanning
Press AS/PS button (17) shortly to scan preset station. When the field strength level is more than the threshold level of
stop level, the radio is holding at that preset number for several seconds with release mute, and then searches again.
Station Storing
-Press 
button to activate automatic seek mode.
-In manual mode, press 
button to select a station.
Press preset
CD/MP3 Operation
Playback
1.Gently insert a disc with the label side facing up; the disc will be pulled into the unit automatically. The disc playback begins.
2.For CD:
3. For MP3 
1). Press 
button to move between work area A, B and C.
2). Press 
button to select the desired folder or file of this work area.
3). Press ENTER button (30) to confirm the selected item.
9
