Select AUTO format, the player TV output Change the TV mode among NTSC, PAL and AUTO. The default setting is NTSC format.
SCREEN SAVER
Change the SCREEN SAVER on or off.
SETTING the TV TYPE
Use the procedure described below to set the output screen according to the type of TV monitor being used.
Setting contents: 4:3PS /4:3LB /16:9. For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc's jacket.)
4:3 PS (PAN SCAN)
Select this when connected to a conventional 4:3size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16:9 size movie).
This is selected upon shipment from the factory.
4:3 (LETTER BOX)
Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black bands visible at the top and bottom of the screen (when playing a 16:9 size movie). The width of these stripes will depend upon the original aspect ratio of the theatre release of the movie.
16:9
Select this when connected to a wide screen TV.
Password
Change the password locking or unlocking Inputting numbers are dispalyed as "XXXX" The default password is “0000”.
SETTING the Rating Level (Parental Control)
Use this function to restrict the viewing of movies to children of appropriate age levels only.
1) Press 
or 
button to select
“PASSWORD” then press ENTER button.
2)The password input mode is activate. Use the numeric keypad “0” to “9” to input the
3)Press 
or 
button to select
“RATING” then press ENTER button. The restriction level 
parental level 
input display appears
4)Press 
button to select the restriction level (1 to 8), and then press ENTER button.
5)When the setting is complete, press SETUP button to return to normal mode.
DEFAULT
Restore the system setup to the default setup.
Language Setup
When you open the language setup menu, you will see the language setup page:
18
