PYLE Audio PLD175TBT instruction manual System Setup, TV System

2.About MP3 What is MP3?

MP3, whose official name is “MPEG-1 Audio Layer 3,” is a compression standard prescribed by the ISO, the International standardization organization and MPEG which is a joint activity institution of the IEC. MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds. Method for creating MP3 files

Audio data is compressed by using MP3 specified software. For details on creating MP3 files, refer to the user's manual for that software.

MP3 files that can be played back by this device have the file extension “MP3”. Files with no extension cannot be played back. Supported playback sampling rates and bit rates

MP3:

Sampling rates: 32 KHz - 48 KHz

Bit rates: 32 + 320 kbps Producing MP3 discs

MP3 files are prepared, and then written to

aCD-R or CD-RW (DVD-R/DVD-RW) using CD-R writing software. A disc can hold up to 1024 files /256 folders (including root folders).

Corresponding file systems

This device supports discs formatted with iso9660 level 1 or level 2.

Under the iso9660 standard, there are some restrictions to remember.

The maximum nested folder depth is 8 (including the root directory). The number of characters for a folder/file names are letters A-Z (all caps), numbers 0-9, and '_' (underscore).

This device also can play back discs in Joliet, Romeo, etc., and other standards that conform to iso9660. However, sometimes the file names, folder names, etc., are not displayed correctly.

Setup

In DVD mode, when the disc is playing or in stop mode, press SETUP button (31) to enter setup menu.

1. When the cursor is on the topside, use buttons to move between the

different pages.

2.Press button to move the cursor to the setup page below and then you can

use buttons to move between the different setup options.

3.Press or ENTER button to move to the choice list of each setup option and

then use buttons and ENTER button to change your selection.

4.When the setting is complete, press SETUP button (31) to return to normal mode.

* When settings are changed, old settings are overwritten. Make a note of the current settings before making changes. If the vehicles battery is disconnected, the settings will be cleared and will return to the factory settings.

System Setup

When you open the setup menu, you will see the system setup page at first, see below:

SYSTEM SETUP

TV SYSTEM

SCREEN SAVER

TV TYPE

PASSWORD

RATING

DEFAULT

EXIT SETUP

TV SYSTEM

TV SYSTEM is used to select the TV output mode. This player can play discs recorded in either PAL or NTSC formats. Select NTSC format, when the unit is connected to NTSC TV.

Select PAL format, when the unit is connected to PAL TV.

17