BASIC OPERATION
To wind through the tracks keep the SEL button pressed in the or direction for about 2 seconds. FF X2 appears in the display. Operating the SEL button again, the speed of rapid forward/reverse changes according to the disc
as follow: DVD/VCD/CD/MP3:
Normal Playback 2x | 4x | 8x | 16x |
b) In Radio Mode:
Move the SEL button in the direction of or in order to set a radio station manually. Keep the SEL taste pressed down in the or direction in order to start the search for a radio station automatically.
12. MOD BUTTON
Press it repeatedly to select AUX IN , RADIO and DISC mode.
During the USB playback, you can press STOP button and then press GOTO button to select the DISC mode.
13. 
(EJECT) BUTTON
Press this button to insert and eject the Disc . The operating unit swings down- wards. Insert the Disc with the labelled side facing upwards gently into the CD slot until the device draws in the CD/DVD automatically. The operating unit will automatically swings back to the normal position.
14. RESET BUTTON
RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons:
A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate.
C. Error symbol on the display.
Note:If press RESET button , the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.
15. IR (infrared)
Sensor for the remote control.
16. AUX IN SOCKET
The operation of the AUX , please see page 15.
17. USB CONNECT LINE SOCKET
The operation of the USB, please see page 17.
18.TFT Display (liquid crystal display)
The operation of the TFT, please see page 16.
13
