Remote Control
Ref # Button | Function |
23ENTER This button is used to confirm selections and settings within many of the menus in the OSD system.
24 | Use to input numerical values during programming, with the GOTO | ||
button, or to directly select a track to play . | |||
|
| ||
|
| In addition, in Radio Mode (when RDS is engaged), 0 serves as | |
|
| the TA button and 9 serves as the AF button. | |
|
|
| |
25 | +10/ | This button is used with the other number buttons for use with | |
|
| button on your mobile handset. | |
|
|
| |
26 | Six numbered preset buttons store and recall stations for each band | ||
|
Preparing the Remote Control
Inserting the Battery
1.First push to inside as the direction indicated by the arrow (See 1 )And then
Remove the battery holder as the direction indicated by the arrow (See 2 ).
2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ).
3.Insert the battery holder. Push in the holder to the original position(See 4 ).
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About 
30 degree in each the direction of the front of the IR mark.
Note :
The lithium cell in the battery compartment of remote control has been secured for
transport with a foil . Before initial use please remove this foil so that the remote
control is ready for operation .
