PYLE Audio PLD70BT owner manual Storing Stations In Memory, Scan Function, Automatic Preset Setup

Radio Operation

Storing Stations In Memory

With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band.

The operation is as below :

Touch the screen of the “ 1-6 ”sections

FLAT			12:06	TA
	ST			NO-DISC	DX
FM1			87.60 MHZ
	MODE		MUTE ON
1	2	3	4	5	6
VOLUME-		SEL	VOLUME+

Touch to preset station

-Store in Memory

>Select the frequency band

>Select the station

>Keep the desired memory key pressed in until the station is heard again after a brief interruption .

e.g. FM1, for the stronger signal

level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .

Scan Function

APS In Radio mode, briefly touch the APS section on the touch screen , the radio briefly plays all the

preset stations of the frequency band .

RDS FUNCTION

In Radio mode, touch it to select the desired item, it will display the following as below :

FLAT	12:06		AF
ST		NO-DISC	DX
FM1	87.60 MHZ
TA	AF	PTY		Touch to select
CLOCK		LOUDNESS	LOC

-Retrieve a preset station

Touch the 1-6 sections briefly to retrieve a station which had been stored in the memory in advance the chose number is shown on display .

Automatic Memory Storing & Program Scanning

Automatic Preset Setup

APS In Radio Mode, Touch and keep the APS section on the touch screen

for about 2 seconds to active

automatic station storage. The radio searches within the current frequency band,

TA Traffic Annonuncement

(priority For Traffic Information)

TA	In Radio mode, touch briefly the
	screen of “TA” range to activate
	the TA function.

Touch it again to turn off the TA function . When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) .

If an FM station is being received which transmits the latest traffic announce- ments from time to time, the TP display lights up.

-20-