JVC DR-MH200SE manual Showview System Setup, Guide Programme Number Set

SUBSIDIARY SETTINGS EN 73

SHOWVIEW System Setup

IMPORTANT:

Normally, Auto Set Up (A pg. 17), Preset Download (A pg. 18)

Guide Programme Number Set

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AINITIAL SET UPB, then press

G.

or Auto Channel Set (A pg. 74) sets the Guide Programme numbers automatically. You need to set the Guide Programme numbers manually only in the following cases.

●When timer programming with the SHOWVIEW system, the channel position, where the station you wish to record is received on your unit, is not selected,

OR

when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place,

^Set the Guide Programme number for that station manually.

●When you wish to timer record a satellite programme with the SHOWVIEW system,

^Set the Guide Programme numbers for all satellite broadcasts received on your satellite receiver.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

CABLE/SAT

TV DVD

3Press selection keys to select ATUNER SETB, then press G.

4Press selection keys to select AGUIDE PROG SETB, then press ENTER.

5Press selection keys to select AGUIDE PROGB, then press

ENTER.

6Press selection keys to select the Guide Programme number for the desired station as shown in the TV listings. Then press

ENTER.

DVD VIDEO SET UP HDD/DVD SET UP			FUNCTION SET UP	INITIAL SET UP
TUNER SET		CLOCK SET
	AUTO CH SET		MANUAL CH SET
	SAT CONTROL SET		GUIDE PROG SET
SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT
EXIT	SELECT
111213 INITIAL SET UP > GUIDE PROG SET
GUIDE PROG				1
TV PROG			YLE2 1
			RETURN
SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT
EXIT	SELECT

AUX

ENTER

Selection Keys

FGDE

7Press selection keys to select ATV PROGB, then press ENTER. Press selection keys to select the number of the unit’s channel position on which the Guide Programme number’s broadcast is received by the unit or the satellite receiver. Then press

ENTER.

●Pressing AUX changes ATV PROGB to ASATB.

●To timer record a satellite programme with the SHOWVIEW system, you need to install the provided Satellite Controller and perform the procedure described in ASatellite Receiver Control SettingB (A pg. 22).

●Repeat steps 5 – 7 as necessary.

8Press SET UP to complete the setting.

Guide Programme Number

AGuide Programme (GUIDE PROG) numberB refers to the assigned TV station numbers, according to broadcast area, for the SHOWVIEW timer recording. The Guide Programme Numbers can be found in most TV listings.

SET UP