JVC DR-MH200SE Connecting To A Satellite Receiver

Filename [MH200SEU_11Editing.fm]

Masterpage:Left0

68 EN

Page 68 Wednesday, 25 May 2005 13:34

SYSTEM CONNECTIONS

Simple Connections

This is an example of a simple connection if your TV has one

21-pin AV input (SCART) connector.

Connect the satellite receiver to the [L-2 IN/DECODER] connector,

then connect the [L-1 IN/OUT] connector to the TV’s connector.

NOTES:

●Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (Apg. 65)

●You can use the Automatic Satellite Programme Recording

function (Apg. 49) with this connection. (HDD deck only)

●To record a programme via the satellite receiver, select L-2 mode

by pressing PR +/– so that AL-2B appears on the front display

panel.

●For details, refer to the instruction manual of the satellite receiver.

Perfect Connections (Recommended)

This is an example of recommended connections if your TV

has two 21-pin AV input (SCART) connectors.

Connect the decoder to the satellite receiver’s connector if you

have a decoder, [L-1 IN/OUT] connector to TV’s connector, and

[L-2 IN/DECODER] connector to the satellite receiver’s connector.

Then connect the satellite receiver and TV.

NOTES:

●Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (Apg. 65)

●You can use the Automatic Satellite Programme Recording

function (Apg. 49) with this connection. (HDD deck only)

●To record a programme via the satellite receiver, select L-2 mode

by pressing PR +/– so that AL-2B appears on the front display

panel.

●To receive a scrambled broadcast, descramble the signal with the

decoder connected to the satellite receiver.

●For details, refer to the instruction manual of the satellite receiver

and decoder.

Connecting To A Satellite Receiver

IMPORTANT

When you set AL-2 SELECTB to ASAT VIDEOB or ASAT S-VIDEOB

(Apg. 65), it is possible to view a satellite broadcast with the TV

set to its AV mode even if the unit is turned off. When the unit is

in Stop mode or recording, press TV AV/VIDEO on the remote

control to turn off the VIDEO lamp on the unit.

●If you turn on the unit when the satellite receiver’s power is off,

nothing appears on the TV screen. In this case, turn on the

satellite receiver, or set the TV to its TV mode, or press TV AV/

VIDEO on the remote control to set the unit to the AV mode.

Outdoor unit

Satellite cable

Satellite receiver

Aerial

TV aerial cable

ANTENNA OUT

ANTENNA IN