JVC DR-MH200SE manual When Receiving a Scrambled Broadcast, Set Stations B, Set Stations a

76 EN SUBSIDIARY SETTINGS

When Receiving A Scrambled Broadcast Set Stations (A)

1Set AL-2 SELECTB to ADECODERB. (A pg. 65)

2Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).

3Press selection keys to select the channel position broadcasting scrambled programmes, then press ENTER. The Confirmation screen appears.

4Press selection keys to select ADECODERB, then press

ENTER.

5Press selection keys to set ADECODERB to AONB, then press

ENTER.

6Press RETURN to return to the Manual Channel Set screen.

●Repeat steps 3 – 5 as necessary.

7Press SET UP or RETURN to close the Confirmation screen.

INFORMATION

If you live in Eastern Europe, ATV SYSTEMB setting appears instead of ADECODERB setting on the Manual Channel Set screen. When you can see the picture but can hear no audio, select appropriate TV system (D/K or B/G). Normally, TV programmes are broadcast as follows.

For Eastern Europe : D/K

For Western Europe : B/G

ASelect a country in Eastern Europe in step 5 of AAuto Channel SetB (A pg. 74).

BPress selection keys to select ATV SYSTEMB in step 7 of AManual Channel SetB (A pg. 75).

CPress selection keys to select appropriate TV System (D/K or B/G).

Set station names that are registered in your unit.

1Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).

2Press selection keys to select the channel you want to modify, then press ENTER. The Confirmation screen appears.

3Press selection keys to select AIDB, then press ENTER.

4Move the arrow to the left ID selection column. Registered station names (ID) (A pg. 88) appear as you press the selection keys.

5Press ENTER to select the desired ID, then press ENTER again to select AOKB.

6Press RETURN to return to the Manual Channel Set screen.

●Repeat steps 2 – 5 as necessary.

7Press SET UP or RETURN to close the Confirmation screen.

Set Stations (B)

Set station names other than the ones registered in your unit.

1Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).

2Press selection keys to select the channel you want to modify, then press ENTER. The Confirmation screen appears.

3Press selection keys to select AIDB, then press ENTER.

4Press selection keys to select the desired characters (A–Z, 0– 9, –, Z, +, & (space)), then press ENTER.

●Enter the remaining characters the same way (maximum of 4).

5After entering all characters, press selection keys to select AOKB, then press ENTER.

6Press RETURN to return to the Manual Channel Set screen.

●Repeat steps 2 – 5 as necessary.

7Press SET UP or RETURN to close the Confirmation screen.

NOTE:

The characters available for the station name (ID) are A–Z, 0–9, –, Z, +, & (space) (maximum of 4).

Fine-Tuning Channels Already Stored

1Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).

2Press selection keys to select the channel you want to fine- tune, then press ENTER. The Confirmation screen appears.

3Press selection keys to select AFINEB, then press ENTER.

4Press selection keys until the picture appears in its best quality, then press ENTER.

●Repeat steps 2 – 4 as necessary.

5

6

Press RETURN to return to the Manual Channel Set screen.

Press SET UP or RETURN to close the Confirmation screen.