Masterpage:Right+
EN 63
Filename [MH200SEU_11Editing.fm]
EDITING
Page 63 Wednesday, 25 May 2005 13:34
You can use your unit as the source player or as the recording
deck.
1Connect another recorder’s 21-pin SCART connector to the
unit’s 21-pin SCART connector as illustrated.
AWhen using your unit as the source player:
^connect its [L-1 IN/OUT] connector to the recording deck.
BWhen using your unit as the recording deck:
^connect its [L-2 IN/DECODER] connector to the source
player.
●If another recorder is compatible with the Y/C signal:
^when using your unit as the source player, set
AL-1 OUTPUTB to ASCART S-VIDEOB. (Apg. 64)
^when using your unit as the recording deck, set
AL-2 SELECTB to AS-VIDEOB. (Apg. 65)
2When using this unit as the recording deck, press HDD or DVD
to select the recording deck.
3When using this unit as the recording deck, press PR +/– to
select AL-2B.
●Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (Apg. 65)
4When using this unit as the recording deck, press REC MODE
repeatedly to set the recording mode.
5Engage the Play mode of the source player.
6Engage the Record mode of the recording deck.
7Stop recording on the recording deck, then stop playback on the
source player.
NOTES:
●All necessary cables can be obtained from your dealer.
●For Y/C signal input/output, be sure to use a 21-pin SCART cable
that is compatible with the Y/C signal.
●When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (Apg. 72) If you
are using another recorder with S-Video and Audio output
connectors, connect its S-Video and Audio output connectors to
this unit’s [S-VIDEO] and [AUDIO] input connectors on the front
panel. Then, set the unit’s input mode to AF-1B in step 3, and set
AF-1 INPUTB to AS-VIDEOB. (Apg. 65)
Edit To Or From Another Recorder
NOTES:
●When using another recorder as the recording deck, refer to its
instruction manual.
●It is not possible to dub copy-protected contents. An error
message will appear on the TV screen.
Player Your unit
Another recorder
Recorder
TV receiver
AWhen using your unit as the source player
21-pin SCART cable
(supplied)
21-pin SCART cable
(not supplied)
Player
Your unit
Another recorder
Recorder
BWhen using your unit as the recording deck
TV receiver
21-pin SCART cable
(not supplied)
21-pin SCART
cable (supplied)
●Slide the TV/CABLE/SAT/DVD switch to DVD.
MH200SEU_00.book Page 63 Wednesday, May 25, 2005 1:34 PM