JVC DR-MH200SE manual Clock Set, Just Clock

			SUBSIDIARY SETTINGS EN 77
	Clock Set		5 Press selection keys to select AJUST CLOCKB, then press
			ENTER. Press selection keys to set to the desired mode, then
			press ENTER.
			● The default setting is AOFFB.
IMPORTANT:			● For the Just clock function, refer to AJust ClockB on the right
If you performed Auto Set Up (A pg. 17) or Preset Download			column.
(A pg. 18), without ever having set the clock previously, the			● If you set to AOFFB, you can disregard the next step as you
unit’s built-in clock is also set automatically.			won’t be able to receive regular clock adjustments.
Perform the following steps only if ^			6 Press selection keys to select ATV PROGRAMMEB, then press
^ Auto Clock Set has not been performed correctly by Auto Set			ENTER. Press selection keys to set the channel position to the
		Up or Preset Download.	number representing the station transmitting clock setting data,
OR			then press ENTER.
^ you want to change Just Clock setting. (See AJust ClockB in			● The unit is preset to receive clock setting and adjustment data
		the right column)	from channel position 1.
			7 Press SET UP to start the clock operation.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

CABLE/SAT

TVDVD

ENTER

Selection Keys

FGDE

NOTES:

●Just Clock (when set to AONB) adjusts the unit’s built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when:

^the unit’s power is on.

^the unit is in the Timer mode.

^a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

^the unit is in the Automatic Satellite Programme Recording mode. (A pg. 49) (HDD deck only)

^the unit is in the Power Save mode. (A pg. 72)

^AL-2 SELECTB is set to ASAT VIDEOB or ASAT S-VIDEOB. (A pg. 65)

●If Just Clock is set to AONB, the unit’s clock is automatically adjusted at the start/end of Summer Time.

●Just Clock may not function properly depending on the reception condition.

Just Clock

SET UP

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AINITIAL SET UPB, then press

G.

3Press selection keys

to select ACLOCK	DVD VIDEO SET UP			HDD/DVD SET UP		FUNCTION SET UP		INITIAL SET UP
		TUNER SET			CLOCK SET
SETB, then press G.
NOTE:		YEAR					2004
		DATE					01. 01 THU
When you have
selected		TIME					--:--
AMAGYARORSZÁGB,		JUST CLOCK					OFF
AČESKÁ REPUBLIKAB,		TV PROGRAMME					1
APOLSKAB or AOTHER	SET UP		ENTER		SELECT WITH @ THEN PRESS [ENTER]
					PRESS [SET UP] TO EXIT
EASTERNB for the	EXIT		SELECT

country setting

(A pg. 17), you cannot use Just Clock function. Skip steps 5 and 6.

4Press selection keys to select AYEARB, then press ENTER. Press selection keys to set the year, then press ENTER.

●Repeat the same procedure to set the date and time.

●When you set the date, press and hold FG to change the date by 15 days interval.

●When you set the time, press and hold FG to change the time by 30 minutes interval.

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set to AONB or AOFFB at the Clock Set screen (the default setting is AOFFB).

IMPORTANT:

If you turn off Just Clock, the accuracy of your unit’s built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to AOFFB.