Masterpage:Right+
EN 39
Filename [MH200SEU_07HDD Operation.fm]
BASIC OPERATIONS ON HDD DECK
Page 39 Wednesday, 25 May 2005 13:34

Instant Timer Recording (ITR)

This easy method lets you record for 30 minutes to 6 hours
(selectable in 30 minutes interval), and shuts the unit off after
recording is finished.
1Press R on the unit to start recording.
2Press R again to engage the ITR mode.
●On the front display panel, A0:30B appears.
3If you want to record for more than 30 minutes, press R to
extend the time. Each press extends recording time by
30 minutes.
NOTES:
●You can only perform ITR using the R button on the unit.
●When the recording capacity becomes full during timer recording
or Instant Timer Recording, the unit is automatically shut off.

Watch Another Programme While Recording On The Unit

While recording is going on, you can watch another programme on
the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the
TV in advance. (Apg. 66)
1During recording, press TV AV/VIDEO to select TV mode.
●Video mode is disengaged, and the VIDEO lamp on the unit
lights off.
●The programme received on the TV’s tuner is displayed on the
TV screen.
2Slide the TV/CABLE/SAT/DVD switch to TV.
3Press PR +/– repeatedly to select the desired channel.
NOTE:
If a decoder is connected to the unit (Apg. 69), you can select a
scrambled channel as well as other normal channels.

Elapsed Recording Time And Disc Remaining Time

Indication

During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
●Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time N Disc remaining time N Clock N (Back
to the beginning)

Receiving Stereo And Bilingual Programmes

Your unit is equipped with a Sound-Multiplex decoder (A2) and a
Digital stereo sound decoder (NICAM) making reception of stereo
and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
NOTES:
●ASUPERIMPOSEB must be set to AAUTOB. Otherwise the on-
screen displays will not appear. (Apg. 72)
●If the quality of stereo sound being received is poor, the
broadcast might be received in monaural with better quality.

Recording Features

●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
●Press HDD on the remote so that the HDD lamp lights up on
the unit.
7
HDD
TV AV/ VIDEO
HDD
DISPLAY
PR+/
-
CABLE/SAT
DVDTV
HDD lamp
Type of Broadcast Being
Received On-Screen Display
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
MH200SEU_00.book Page 39 Wednesday, May 25, 2005 1:34 PM