Masterpage:Right+
EN 11
Filename [MH200SEU_05Name.fm]
INDEX
Page 11 Wednesday, 25 May 2005 13:34

Rear View

AAntenna Input Connector [ANTENNA IN] Apg. 16
BComponent Video Output Connectors [COMPONENT
VIDEO OUT (Y/P
B
/P
R
)] Apg. 16
CS-video Output Connector [S-VIDEO] Apg. 16
DAudio Output Connectors [AUDIO OUT (RIGHT/LEFT)]
Apg. 61, 69
EAV COMPU LINK Connector*
* Not function with this unit.
FDigital Audio Output Connectors
[DIGITAL AUDIO OUT (OPTICAL/COAXIAL)] Apg. 61, 69
GCooling Fan
This prevents the temperature from rising inside the unit.
Do not remove it.
Install the unit so as not to block the area around the fan.
The unit may become hot when it is turned off, as the cooling
fan on the rear of the unit is not activated. However, the cooling
fan may be activated in the following cases;
^In the Automatic Satellite Programme Recording standby
mode (Apg. 49), slightly before the starting time of VPS/PDC
recording (Apg. 46).
^If you connect the decoder or satellite receiver to [L-2 IN/
DECODER], and if AL-2 SELECTB is set to ADECODERB,
ASAT VIDEOB or ASAT S-VIDEOB. (Apg. 65)
^When AJUST CLOCKB is set to AONB (Apg. 77).
(Set AJUST CLOCKB to AOFFB if you mind the noise of the fan.)
HAC Power Cord Apg. 16
IAntenna Output Connector [ANTENNA OUT] Apg. 16
JL-1 Input/Output Connector [L-1 IN/OUT] Apg. 16, 63, 68,
69
KL-2 Input/Decoder Connector [L-2 IN/DECODER] Apg. 22,
63, 68, 69
LSatellite Control Connector [SAT CONTROL] Apg. 22
MRegion Number Label Apg. 6

CDFEGHBA

KL M

IJ

MH200SEU_00.book Page 11 Wednesday, May 25, 2005 1:34 PM