PYLE Audio PLDF23 owner manual General Operation

GENERAL OPERATION

Initial System Start-Up

Be sure to press the RESET button ( 12) When using the unit for the first time, after all connections are completed correctly.

1.Turn off the unit power.

2.Press RESET with a ballpoint pen or similar pointed object.

Turning Power On and Off

Press button (1) or insert a disc to turn on the unit.

When system is on, press button (1) to turn off the unit.

Loading/Removing a Disc

1.Insert the disc into the disc slot (7) with the printed side facing up. The player will play the disc automatically.

2.Whenever press button (6) to eject the disc.

Adjusting the volume level

Press VOL+/VOL- button (26) to adjust the volume level.

Input Source Select

Press MODE button (3) to switch to the desired input source.

The mode will change each time the button is pressed.

.

DVD AV

ESP Function

This unit features ESP (anti-shock) protection. It works by “playing ahead” and buffering the stored part of the program, playing it back when the realtime portion of the program has been disrupted. Depending on the listening/viewing mode you are in, the amount of time of disruption which can be hidden is as follows:

CD, VCD: 18 seconds MP3:160 seconds DVD: 6 seconds MPEG4: 20 seconds

Last Position Memory Feature

-During disc playback, if you press button (1) to turn off the unit and then press the button again to turn on the unit, the DVD unit will resume playing from the point that it was interrupted.

-During disc playback, if you press the MODE button (3) to switch to other mode, and then return to DVD mode again, the unit will resume playing from the point that it was interrupted.

Reset Function

RESET button on the housing must be activated with either a ballpoint pen or thin metal object. The RESET button (12) is to be activated at the following times:

-After initial installation of the unit when all wiring is completed.

-Some of the function buttons do not operate.

-Error symbol appears on the display. Note:

If the unit still does not function after you have pressed RESET, try cleaning the connectors which link the panel and the main housing with a cotton swab moistened with isopropyl (rubbing alcohol). If it still does not work, bring the unit to your dealer for servicing or advice.

User ’s Manual - page 9