Ifit appears that your DVD unit is faulty,
pleasefirst consult this checklist. It may
bethat something simple has been
overlooked.
Underno circumstances should you try to
repair the player yourself, as this will
invalidate the warranty. Only qualified
service personnel can remove the cover
orservice this player.
If the power supply is connected to the
car accessory circuits, but the engine is
not turned on, switch the ignition key to
“ACC”.
Check if the fuse is blown. Then
replacethe new fuse.
Checkif the on/off button on the front of
theplayer is set to on.
Check if the monitor or TV is switched
on.
Check if select proper mode has been
selected such as Disc Play mode orAV
mode.
Checkthe video connection.
Check the disc for fingerprints and
cleanit with soft cloth, wiping from centre
toedge.
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
The disc format is not according to the
TV-setused (PAL/NTSC).
The disc format is not according to the
TV-setused (PAL/NTSC).
Ensurethe disc label is upwards.
Cleanthe disc.
Check if the disc is defective by trying
anotherdisc.
NoPower
NoPicture
DistortedPicture
CompletelyDistorted Picture
NoColor in Picture
DiscDoes Not Play
TroubleShooting
User’sManual - page 21
NoSound
Checkthe audio connections.
ThePlayer Does Not Respond To the
RemoteControl
Distortedor B/W Picture
NoAudio at Digital Output
ButtonsDo Not Work
Aim the remote control directly at the
sensoron the front of the player.
Remove any obstacles which may
interferewith the signal path.
Inspect or replace the remote control
battery.
The disc format is not according to the
TV-setused (PAL/NTSC).
Checkthe digital connections
Check the Digital Audio menu to make
sure that the digital output is correctly
set.
Check if the audio format of the
selected audio language matches your
receiver'scapabilities.
Press Reset button on the housing of
theDVD unit.