User’sManual - page 8
Preparingand Using The Remote
Control
*Before using the remote control,
pleasetake the transparent insulator
stripoff the bottom of remote control.
-Donot subject the remote control to
excessiveshock.
-Donotputinapocket.
-Keepaway from food, moisture and
dirt.
-Donot place in direct sunshine.
*Point the remote control at the remote
sensor(11) from no more than 6 feet
away.
*If the IR sensor is exposed to direct
sunlight,the remote control may not be
ableto communicate with it properly.
Youmay need to relocate or shield the
IRsensor.
*If you are more than 30 awayfrom
beingdirectly in front of the IR sensor,
theremote control may be unable to
communicateproperly.
*The remote control is small,
lightweightprecision device. To avoid
damage,short battery life, operational
errosand poor response, observe the
following:
0
USINGTHE REMOTE CONTROL
Batteryreplacement
Theremote control uses a lithium button
typebattery, model CR 2025 3V. Do not
useany other kind of battery in the
remote.Follow these instructions when
installingor replace the battery.
1. Removethe battery holder by
pressingthe locking tab with your thumb
A
B
3. Closing the cover
Gentlypush in the holder until securely
lockedinto place.
2. Replacingthe battery
Replacethe battery with the same type
andthe (+) side facing up.