OPERATION
Then you can press VOL 
/ 
buttons
(48)to select hour or minute and press TUN/CH
/ 
buttons (47) to change the corresponding item.
Menu Control operation in CDC mode
Press MODE button (12) on front panel or MODE button (43) to select CDC mode. The following information will appear on the display (5).
CDC PLAY 00:12
VOLUME | 36 | DISC | 01 |
BASS | 0 | TRACK | 01 |
TREBLE | 0 |
|
|
BALANCE |
|
| |
FADER |
|
| |
LOUD | OFF |
|
|
EQ | FLAT |
|
|
Press MENU button (19) or (45), the VOLUME will be selected, then press TUN/CH
/
buttons (46) to select the item upward or downward. Then press VOL 
/ 
buttons (48) to adjust the selected item. The corresponding value will show on the display.
Respectively press PAU (28), INT (29), RPT (30), RDM (31), CD- (32), CD+ (33) button on the panel to enter the corresponding function referring to the CDC operation described above, the corresponding information (such as PAUSE, INTRO, REPEAT, RANDOM and the disc number) will appear on the display (5).
CDC PLAY 00:24
VOLUME | 36 | DISC | 03 |
BASS | 0 | TRACK | 02 |
TREBLE | 0 |
|
|
BALANCE |
|
| |
FADER |
|
| |
LOUD | OFF |
|
|
EQ | FLAT | REPEAT |
|
Directly press TUNING/TRACK button
(14)on the panel to move to the s previou track; press TUNING/TRACK button (13) on the panel control to move to the next track.
TV operation (when the unit is connected to other TV unit through the cable with the
Switching to TV mode
Press MODE button (12) on the front panel or MODE button (42) on remote control to select TV mode and the memory channel will show on the TFT display (5).
Selecting receiving mode
In TV mode, press TV/AV button (21) or (41) to select among TV/ AV1/AV2/ RGB (optional). The corresponding state will show on the TFT display (5). When you connect the RGB terminals on the back of the unit to the corresponding RGB system, then press MODE button on remote control to select RGB mode, the RGB signal will appear on the screen. Note: You can receive the TV/AV1 /AV2 mode when you brake the car.
If you are driving the car, you can't receive the picture signal in TV/AV1 /AV2 just receive the sound signal, it is blue screen then.
Selecting channel
-Press CHANNEL 
button (24) or TUN/CH 
button on remote control to choose channel upward and or Press CHANNEL
button (25) or TUN/CH 
button on remote control to choose channel downward.
-The numeric buttons (0,1~9) (36) allow you to select the corresponding channel directly.
-Press digital select button
15
