PYLE Audio PLTV65R Local/distant, Mono/stereo, Scan, CDC operation Switching to CDC mode

OPERATION

-Retrieve a Preset Station Press any one of the buttons (15) on the front panel or (37) on remote control to retrieve a station which had been stored in the memory in advance the chosen number is shown on display.

Automatic memory storing & program scanning

-Automatic memory storing Press AS/PS button (48) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button.

-Program scanning

Press AS/PS button (48) shortly

to scan preset station. When the field strength level is more than the threshold level of stop level. The radio is holding at that preset number for several seconds with release mute, then searches again.

Local/distant

Press LOC button (38) on remote control to select between local and distant stations.

Local setting for reception of strong station, and a distant setting for reception of weaker stations. This function is effect during AUTO SEEK operation.

Mono/stereo

Press MO/ST button (16) on the front panel or ST/MO button (53) on remote control to select mono or stereo mode. You can sometimes improve reception of distant stations by selecting mono operation.

Scan

Press -/-- (SCAN) button (39) on remote control to set the function to scan mode, which scanning to higher frequency station with receivable

signal and keep on each station for several seconds. At this time, press any one of the buttons (15) on the front panel or (37) on remote control, the current scanned station will be stored into the corresponding number button, then it keeps on scanning other stations.

CDC operation

Switching to CDC mode

Press MODE button (12) on the front panel or MODE button (42) on the remote control to select CDC mode.

Selecting tracks

Press TUNING/TRACK button (14) on the front panel to move to the previous track; press TUNING/ TRACK button (13) on the front pane lto move to the next track. The track number shows on the display(4).

Pausing playing

Press PAU button (28) on the front panel to pause CD play. Press it again to resume play.

Previewing all tracks

Press INT button (29) on the front panel to play the first 10 seconds of each track on the current disc. Press it again to stop intro and listen to track.

Repeating the same track

Press RPT button (30) on the front panel to continuously repeat the same track on the current disc. Press it again to stop repeating.

Playing all tracks in random

Press RDM button (31) on the front panel to play all tracks on the current CD in random order. Press it again to cancel the mode. In the course of playing a track, press TUN/CH / buttons (46) to play another track in random order.

Selecting disc

Press CD+ button (33) on the front panel to select next disc and press CD- button (32) on the front panel to select previous disc.

13