PYLE Audio PP-5200 warranty

cutter blade along the track and reset it to home position. Please test push the top hood release button from time to time to see if the hood opens as result of cutter position reset. Close the cutter cover back when done.

Push down to test release Top Hood

Use Phillips screw driver to reset cutter for PP-5000 back to home position

For PP-5200 please refer to pictures below and lift up a transparent protective cover over the adjustment wheel. Turn this wheel downward to reset the cutter blade back to its home position. Apply some mechanical assistance if necessary. When the cutter blade returns to its standard position, a through hole in the plastic gear will show up in the window as illustrated below.

Lift transparent protective foil

Turn the wheel downward

till a through hole in the plastic gear appears in this window

Then close the cutter cover back to position when finish. The lock up of the print hood can then be released after this problem solved.

3 - 5