BASIC OPERATION
THE RADIO OPERATIONS
MASTER VOLUME
DOLBY DIGITAL/DTSAVRECEIVER
POWER
ON OFF
STANDBY
INPUT SELECTOR
AV3IN
PHONES
AUTOMATIC TUNING
1.Press the POWER button first, then press the STANDBY button to turn this unit on.
2.Rotate the INPUT SELECTOR knob on front panel or push the INPUT SELECT button on remote control to select FM.
3.Pressing the BAND button on remote control to select between FM and AM.
4.Press the “AUTO/MANUAL” button on remote control to activate automatic selection. (Default mode is Manual selection)
Note: Auto appears on the display.
5.Press TUNING + and TUNING - to select the station you want to listen to. When a station is tuned in, the tuning process will stop automatically. (Automatic selection)
6.Press TUNING + or TUNING - again to select another channel.
MANUAL TUNING
It is for selecting stations, which cannot be tuned automatically (manual selection)
To tune a channel manually:
Skip step 4 in the above procedures. Each time the TUNING + or TUNING - button is pressed momentarily (0.5 second or less), the frequency changes by a fixed step.
FM: 50 kHz steps
MW: 9 kHz steps
Two FM modes available:
Press ST/MONO button on remote control to alternate between Stereo mode and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the “8 ” indicator lights on the display.
Mono
To compensate for weak FM stereo reception, select this mode. Reception will now be forced monaural, reducing unwanted noise.
If DISPLAY button is pressed, the details of incoming source will be displayed.
Preset tuning
This facility is used to store FM, AM broadcasting from channel 1 to15 respectively.
Automatic Memory Presetting
1.Rotate the INPUT SELECTOR knob on front panel or push the INPUT SELECT button on remote control to select FM.
2.Select AM or FM by pressing the BAND button.
3.Press the “APS” button on remote control.
Up to 15 of the
How to select preset stations
Press the “STATION
Manual Memory Presetting
1.Rotate the INPUT SELECTOR knob on front panel or push the INPUT SELECT button on remote control to select FM.
2.Select AM or FM by pressing the BAND button.
3.Press the TUNING + or TUNING - buttons to select a frequency channel you want to preset.
4.Press the MEMORY button briefly.
5.While the “MEM” indicator is lit, press TUNING+ or TUNING - button to select a preset station. The station number will be displayed on the screen.
6.Press the MEMORY button to confirm.
To store more stations, repeat steps 3 to 6.
16