PYLE Audio PT-690A manual Remote Control Function

REMOTE CONTROL FUNCTION

NO. & NAME	DESCRIPTION	NO. & NAME	DESCRIPTION
1. POWER	Push this button to turn the unit into	16. ST/MONO	Press this button to alternate between
	standby mode, push it again to turn off the		Stereo and Mono mode when listen
	unit.		to FM broadcast.
2. MUTE	Press this button to mute the sound, push	17. VOLUME	Press these buttons to decrease or increase
	again to cancel the mute function.	UP/DOWN	the volume.
3. SURROUND	Press this button to choose one of the	18. LFE TRIM	Under the Pro Logic 5.1CH or DTS 5.1CH
MODE	following surround modes: THEATER,		mode, press this button and adjust the
	HALL, PASSTHRU, MOVIE, MUSIC		volume to set the Low Frequency output
	and ROOM.		level
4. DISPLAY	Press this button to display the state of	19. TEST TONE	To balance speakers in Dolby Digital or
	input source.		Dolby Pro Logic mode.
	And when listening to the FM
	broadcasting with RDS, press this button
	to show PS, PTY, RT and RT. (WITH
	RDS)
5. PRO LOGIC II	When receiving Analog/digital /PCM	20. INPUT	To select input modes: ANA, OPT, and
	signal or 2CH Pro Logic, turn on this	MODE	COAX when using digital in.
	button then the playing is under analog
	5.1CH state.
6. MEMORY	Press it to store the broadcast station	21. CH SELECT	Select channels by pushing this button.
	as a preset.		then use volume key to balance speakers.
7. APS (without	APS---allocates and memorizes radio	22. DIMMER	Press this key to set the brightness of the
RDS) / PTY	stations automatically.		front panel display
SEARCH (with	PTY SEARCH---in FM state, press this
RDS)	button, the current program type appears
	on the display, using TUNING +/- to
	select the program type you desire.
8. STEREO	With this unit in STEREO mode, only	23.	Press this button to turn on/off the output
	Front Left & Front Right speakers and	SUBWOOFER	of subwoofer.
	Woofer have output.	ON/OFF
9. DOLBY	Press this button to playback source in	24. INPUT	Push this button to select inputs Tuner
DIGITAL	DOLBY DIGITAL or STEREO.	SELECT	(FM, AM), VIDEO 1, VIDEO 2, VIDEO
			3, DVD, AUX, TAPE and PHONO.
10. STATION +/-	Press these buttons to select a preset	25. TREBLE	Press this button for Treble adjustment,
	channel during the tuner mode.		then press +/- key to adjust the level.
11. DYNAMIC	Press this button repeatedly to reach your	26. + / -	These keys are used for SPK SETUP and
	desired compression dynamic range.		DELAY TIME, Treble and Bass
			adjustment.
12. BAND	Press this button to alternate between FM	27. BASS	Press this button for Bass adjustment, then
	and AM.		press +/- key to adjust the level.
13. TUNING -	Tuner frequency down.	28. SPK SETUP	Under PRO LOGIC II or Digital state, it
			can change the desired Speaker Setting
			shown on the display.
14. AUTO	This button is used to select AUTO or	29. DELAY	Press this button to set the delay time for
MANUAL	MANUAL tuning for AM and FM	TIME	the Dolby digital/Dolby Pro Logic modes.
	stations. Press once to set to AUTO
	again for MANUAL.
15. TUNING +	Tuner frequency up.

13