Q-Logic 4000 SERIES manual Label, Agency Certification, EMI and EMC Requirements

Q

2 – QLA4000/4000C Agency Certification

Table 2-2. QLA40xx HBA Specifications

Type	Specifications
Universal PCI specifications	PCI Local Bus Specification, revision 2.2
	32/64-bit, 33/66 MHz
	3.3-V and 5-V buses supported (± five percent)
Standards	IP v.4
	SCSI Architecture Model (SAM-2)
	SCSI-3 Command Set
Connectors	Optical mutimode cable with an LC-style duplex connector
	(QLA4000 HBA)
	Cat5e or Cat6 straight-through cable (not cross-over
	cable) with an RJ45 connector (QLA4000C HBA)
Form factor	PCI full card: 16.93 cm×5.15 cm (6.7"×2.5")
Operating power	25 watts

2.4

Label

The transceiver on the QLA4000 HBA is a Class I laser product. It complies with IEC 825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated under recommended operating conditions.

CLASS I LASER PRODUCT

2.5

Agency Certification

The following sections contain a summary of the EMC/EMI test specifications performed on the QLA4000/4000C (IS0110404) to comply with radiated emission, radiated immunity and product safety standards.

2.5.1

EMI and EMC Requirements

The QLA4000/4000C conforms to the following requirements:

■FCC Part 15, Class B

❑Radiated EmissionClass B

❑Conducted EmissionClass B

■ICES-003 Class B

■CE Mark 89/336/EEC EMC Directive

IS0053301-00 D 2-5