Q-Logic 59244-00 A Install New Chassis in the, Rack, Reinstall CPU Blades, Reinstall Fan Blades

Models: 59244-00 A

1 8

Page 6

SANbox 9000™ Series Chassis Replacement Guide	A
Install New Chassis in the
Rack
Slide the new chassis into the cabinet rails.
Fasten the switch rails to the cabinet rails with
two screws.
1
	1

1. Screws

Install the CPU blades in slots CPU0 and CPU1 of the new chassis according to the labels on the CPU blades.

Open the CPU blade latch and slide the CPU blade into the chassis until it makes contact with the midplane connector.

Rotate the latch to lock the CPU blade in place.

Open the Fan blade latch and slide the blade into the chassis until it contacts the midplane connector.

Rotate the latch right-to-left to lock the Fan blade in place.

6	59244-00 A

Image 6

Contents

59244-00 A Tools RequiredSANbox 9000 Series Chassis Replacement Guide S i m p l i f yBackup the Switch Configuration Inventory Feature LicensesPower Down the Switch Disconnect Ethernet and Serial Cables Disconnect Fibre Channel Port CablesRemove I/O Blades Remove the Fan Blades Remove Power SupplyBlades Remove CPU BladesPrepare the New Chassis Remove Chassis from the RackRemove Brackets and Rails 1. LatchReinstall Fan Blades Install New Chassis in theReinstall CPU Blades Fasten the switch rails to the cabinet rails withPower Up the Switch Reinstall Power Supply BladesReinstall I/O Blades Reconnect Ethernet and Serial CablesReinstall License Keys Observe Heartbeat LEDVerify the POST Results