Q-Logic ISR6142 manual Safety Communications Statements

1 – Introduction Safety

S

„ANSI SCSI – SCSI-3 Architecture Model (SAM), X3T10/994D/Rev 18, SCSI-3 Controller Command Set, X3T10/Project 1047D/Rev 6c. IEEE – 802.1Q Virtual LAN (VLAN), 802.1p Priority of Service, 802.3x Flow Control, 802.3ad Link Aggregation

„SCSI-3 Fibre Channel Protocol (SCSI-FCP), X3.269:1996

„Fibre Channel Physical and Signaling Interface (FC-PH), X3.230:199

„Fibre Channel 2nd Generation (FC-PH-2), X3.297:1997

„Third Generation Fibre Channel Physical and Signaling Interface (FC-PH-3), X3.303:1998, Fibre Channel-Arbitrated Loop (FC-AL-2), working draft, revision 6.4, August 28, 1998

„Fibre Channel Fabric Loop Attachment Technical Report (FC-FLA) NCITS/TR-20:1998, Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA)

„SCSI Fibre Channel Protocol-2 (FCP-2) working draft, revision 3, October1, 1999

„Fibre Channel over TCP/IP (FCIP), RFC3821

„ANSI Information Technology-SCSI 3 Architecture Model, revision 18, November 27, 1995

Safety

WARNING!!

A Warning notice indicates a hazard that has the potential of causing minor personal injury.

CAUTION!

A Caution notice indicates the presence of a hazard that has the potential of causing damage to the equipment.

Communications Statements

The following statements apply to this product. The statements for other products intended for use with this product appear in their accompanying manuals.

1-2 SN0051102-00 A