Q-Logic ISR6142 manual Installation

A

iSR6142 Intelligent Storage Router Installation Guide

4	Installation
	Site Requirements	4-1
	Management Workstation	4-1
	Power Requirements	4-2
	Environmental Conditions	4-2
	iSR6142 Router Installation	4-2
	Pre-installation Check List	4-4
	Mount the Router	4-4
	Install the Transceivers	4-5
	Connect the Management Workstation to the Router	4-5
	Configure the Management Workstation	4-5
	Setting the Workstation IP Address	4-6
	Configuring the Workstation Serial Port	4-6
	Install the SANsurfer Router Manager	4-7
	Windows Installation	4-7
	Linux Installation	4-8
	Start the SANsurfer Router Manager	4-8
	Connect the Router to AC Power	4-9
	Configure the Router	4-10
	Cable Devices to the Router	4-11
	Firmware Installation	4-11
	Using the SANsurfer Router Manager to Install Firmware	4-11
	Using the CLI to Install Firmware	4-12

5	Diagnostics and Troubleshooting
	Chassis Diagnostics	5-1
	Input Power LED is Off	5-2
	System Fault LED is On	5-2
	Power-OnSelf-Test Diagnostics	5-2
	LED Blink Patterns	5-3
	Heartbeat Blink Pattern	5-3
	System Error Blink Pattern	5-3
	Management Port IP Address Conflict Blink Pattern	5-4
	Over-Temperature Blink Pattern	5-4
	Recovering a Router	5-5

SN0051102-00 A Page v