Safety Overview
Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Warning If the symbol of suitability with an overlaid cross appears above a port, you must not connect the port to a public network that follows the European Union standards. Connecting the port to this type 
of public network can cause severe personal injury or can damage the unit. Statement 1031
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051
Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029
Warning Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when servicing. Statement 1034
Warning Before opening the unit, disconnect the
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001
Warning Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Statement 1036
Cisco Communication Media Module for Catalyst 6500 Series Switch and Cisco 7600 Series Router Installation and Verification Note
8
