Cisco Systems 6500-E, 6513-E manual Accessing the Port Adapter Ports, Connector Pin, Number, Signal

Accessing the Port Adapter Ports

Table 7	RJ-21 Connector Pinouts
Port	Connector Pin		Port	Connector Pin
Number	Number	Signal	Number	Number	Signal
1	1	Ring	13	13	Ring
	26	Tip		38	Tip
2	2	Ring	14	14	Ring
	27	Tip		39	Tip
3	3	Ring	15	15	Ring
	28	Tip		40	Tip
4	4	Ring	16	16	Ring
	29	Tip		41	Tip
5	5	Ring	17	17	Ring
	30	Tip		42	Tip
6	6	Ring	18	18	Ring
	31	Tip		43	Tip
7	7	Ring	19	19	Ring
	32	Tip		44	Tip
8	8	Ring	20	20	Ring
	33	Tip		45	Tip
9	9	Ring	21	21	Ring
	34	Tip		46	Tip
10	10	Ring	22	22	Ring
	35	Tip		47	Tip
11	11	Ring	23	23	Ring
	36	Tip		48	Tip
12	12	Ring	24	24	Ring
	37	Tip		49	Tip
–	–	–	–	25, 50, 51, 52	GND

Accessing the Port Adapter Ports

From the module command-line interface (CLI), you identify each port adapter by interface_name followed by slot_num/port_num. For example, to configure the first port on a 6-port T1 port adapter that is installed in slot 2, specify T1 2/0. For the second port, specify T1 2/1, and so on.

Cisco Communication Media Module for Catalyst 6500 Series Switch and Cisco 7600 Series Router Installation and Verification Note

28