5.4.2 RECORD CHANNEL SETUP
Move the cursor to REC CH Set and press the “ENTER” button. The REC CH setup window will
appear. This option is only available in Field mode. Press the up and down buttons to select a
channel, then press left or right buttons to change the setting. If the channel setting is OFF this
channel will not be recorded in recording mode. If the resolution is set to CIF mode the REC CH
Setup window is not accessible. Set Record ON/OFF for the selected channels.
5.5 NETWORK SETUP Move the cursor to Network Setup, then press the “ENTER” button. The network setup menu
window will appear, which is illustrated below. If the PC Viewer software for viewing from the
Internet is connected to the DVR you can’t access this menu until you disconnect PC Viewer.
IP MODE: the DVR has 2 IP modes, STATIC IP and DHCP. If you select STATIC IP you can set
the IP address manually. If you select DHCP mode the DVR will automatically get the IP address
from the router the DVR is attached to.
For STATIC IP press up or down buttons to move the cursor among the digits, you can press right
or left buttons to modify the digits, also, when you select a digit, you can press the “ENTER”
button then press left or right buttons to select each bit of the digit, and then press right or left
buttons to modify the bit of this digit. Press “ENTER” to save your changes.
23