2.2 Function Control Buttons
1. Auto/1: Auto key, in shift mode, press this button and the DVR will be in auto dwell state, it
dwells according to the time set in auto sequence set menu, and you can set the dwell time of
each channel. Press this button to quit this mode. If not in shift mode press this button to see
channel 1 full screen. When inputting numbers this button is used to enter the number “1”.
2. Zoom/2: Zoom key, in shift mode, press this button and the DVR will be in zoom mode, please
refer to 5.10 PTZ Set for details, press zoom button again to cancel zoom operation. If not in shift
mode press this button to see channel 2 full screen. When inputting numbers this button is used
to enter the number “2”.
3. USB/3: USB key, in shift mode, press this button and the DVR will start USB backup, please
refer to 5.8 USB Backup for details, press USB button again to cancel USB backup. If not in shift
mode press this button to see big picture of channel 3 full screen. When inputting numbers, this
button is used to enter the number “3”.
4. Display/4: Display key, in shift mode press this button to display current information on the
screen, press again to clear the information display. If not in shift mode press this button to see
channel 4 full screen. When inputting numbers this button is used to enter the number “4”.
5. Freeze/5: Freeze key, in shift mode press this button and the DVR will be in freeze mode.
Press this button to quit freeze mode. If not in shift mode press this button to see big picture of
channel 5 full screen. When inputting numbers this button is used to enter the number “5”.
6.WM/10+: Watermark button, In shift mode, if the DVR is playing video, you can press this button to
see the watermark on the picture. If the video was recorded by this DVR, and has not be changed,
there will be a watermark symbol on each picture. Press the watermark key again to clear the display.
If not in shift mode press this button and then press 1 to 6 to see channel 11 to channel 16 full screen.
7. Schedule/6: Schedule key, in shift mode press this button to enter schedule mode. If the DVR
is in schedule mode there will be an “S” symbol on the screen. Press this button again to quit
schedule mode. If not in shift mode press this button to see channel 6 full screen. When inputting
numbers this button is used to enter number ”6”.
8