Alarm output:
There are three alarm output pins, the status of these pin are illustrated below:
Before Alarm After Alarm
There is an example for alarm output connection
Here are instructions to install the hard drive.
Notice: If the DVR comes with a HDD pre-installed then skip the following steps.
5. Lock the ha rd drive drawer by turning the key clockwise.
2. Open the top cover of the drawer.
DVR
3. Connect the DATA cable &
power cord.
4. Close the top cover of the drawer
and put HD drawer back into the DVR
1. Pull out the hard drive rack from
If you have another HDD, please set the jumper on that HDD to SLAVE, then open the DVR, put
the HDD into the HDD rack, and then connect the power cord and DATA cable to the HDD.
12