5.10 PTZ SETUP
Set the right protocol, baud rate, and ID and you can control SPEED DOME cameras through
the DVR.
Move the cursor to Protocol Set, then press the “ENTER” button, the protocol set window will
appear which is illustrated below. Press up or down buttons to move the cursor and press right or
left buttons to change the value.
CHANNEL SEL: Select the video channel that is connected to the speed dome that you want to
control.
BAUDRATE: Range is from 1200bps to 19200bps.The default is 2400bps.
DOME ADDR: The address of the speed dome, changeable from 0x00 to 0xff.
PROTOCOL: The protocol that DVR needs to use to control speed dome, options include
PELCO-P, PELCO-D, NEON, LILIN, default is PELCO-P.
6.1 STARTING THE DVR
Before starting the machine make sure all the items in the “Safety Precautions” at the
beginning of this manual are fulfilled.
Also check the system connections including input and output equipment connections and all
power connections.
Please insure the video-recorder’s input video (NTSC/PAL) and the monitor (NTSC/PAL) are
set correctly for your area.
Insert the removable hard drive case into the slot, and lock it (turn the hard drive lock
clockwise); connect the power, the DVR will start up.
31