Chapter 4 | Installation |
System Information
From the System Information screen you can check current firmware versions and other general switch information.
System Information
Versions
The Versions screen displays
Versions
Unit The unit number of the switch, from 1 to 6. Status The status of the switch, either master or slave. Software Version The version number of the software . Boot Version The version number of the boot file. Hardware Version The Switch’s current hardware setup.
General System Information
The General System Information screen displays the System Description, System UpTime, System MAC Address, System Contact, System Name and System Location.
General System Information
Management Settings
The Management Settings screen displays the Serial Port Configuration option.
Management Settings
Serial Port Configuration
The Serial Port Configuration screen displays the current baud rate setting. To change the baud rate, select Edit, then use the spacebar to toggle through the different baud rates. Use the Save action to set the new baud rate.
Serial Port Configuration
User & Password Settings
The User & Password Settings screen displays all the user accounts defined on the system.
User & Password Settings
The default account is admin. You cannot edit this account (its user name and password cannot be changed). For security purposes, Linksys recommends creating at least one user account with a unique user name and password. You can create up to five user accounts total.
10 |
