Linksys SLM248G4S (G5), SLM224G4S (G5) manual Port Management Link Aggregation, LAG Configuration

Chapter 5 Configuration Using the Web-based Utility

•10 Half  The port advertises 10 Mbps half-duplex operation.

•10 Full  The port advertises 10 Mbps full-duplex operation.

•100 Half  The port advertises 100 Mbps half-duplex operation.

•100 Full  The port advertises 100 Mbps full-duplex operation.

•1000 Full  (Gigabit ports only) The port advertises

1000 Mbps full-duplex operation.

Current Advertisement  (Read-only) The speed and duplex mode settings that the port is currently advertising.

Neighbor Advertisement  (Read-only) The speed and duplex mode settings that the neighbor port (the port to which the selected port is connected) is advertising. If the port has no neighbor port, this field displays “Unknown.”

Back Pressure  Select Enable or Disable (default) to enable or disable Back Pressure mode on the port.

Current Back Pressure  (Read-only) The current Back Pressure mode on the port.

Flow Control  Select Enable or Disable to manually enable or disable flow control, or select Auto-Negotiationfor automatic selection of flow control on the port.

Current Flow Control  (Read-only) The current flow control setting.

MDI/MDIX  Select the port’s MDI/MDIX type, either MDI, or MDIX. The MDI setting is used if the port is connected to an end station. The MDIX setting is used if the port is connected to a hub or another switch.

Current MDI/MDIX  (Read-only) The port’s current MDI/ MDIX type.

LAG  (Read-only) The LAG to which this port belongs, if the port is a LAG member.

Click Save to save the settings and leave the screen open. Click Save & Close to save the settings and close the screen. Click Close to close the screen without saving the settings.

Port Management > Link Aggregation

Port Management > Link Aggregation

You can create multiple links between devices that work as one virtual, aggregate link. This is known as a Link Aggregrated Group (LAG). LAGs offers a dramatic increase in bandwidth for network segments where bottlenecks exist, as well as providing a fault-tolerant link between two devices. You can create up to eight LAGs on the Switch. Each LAG can contain up to eight ports.

LAG  The LAG number (1-8).

Description  The user-defined description for the LAG.

Admin Status  The administrative status of the interface. To change the status, select Up to enable the interface, or select Down to disable it.

Type  Indicates if a LAG has been manually configured (static) or dynamically set through LACP.

Link Status  Displays the status of the link. Speed  Displays the port speed.

Duplex  Displays the duplex mode. Flow Control  Displays the flow control. LAG Mode  Displays the LAG mode.

Detail  To create a new LAG, click Detail in the Detail column to display the Link Aggregation detail screen.

LAG Configuration

The Link Aggregation detail screen lets you configure a LAG. You can create a LAG, select its ports, enable/disable the LAG, and set the capability advertisements, speed, duplex mode, and flow control. To use this screen, click Detail on the Port Settings screen.

24/48-Port 10/100 + 4-Port Gigabit Resilient Clustering Smart Switch with 2 Combo SFPs 20