Chapter 5 | Configuration Using the |
Admin > Cable Test - Gigabit Ports
Advanced (Gigabit ports only) Click the Advanced button to open the Copper Cable Extended Feature screen. The Copper Cable Extended Feature screen contains the following fields.
•Cable Status Displays the cable status.
•Speed Indicates the speed at which the cable is transmitting packets.
•Link Status Displays the current link status.
•Pair The pair of cables under test.
•Distance to Fault Indicates the distance between the port and where the cable error occurred.
•Status Displays the cable status.
•Cable length Displays the cable length.
•Channel Displays the cable’s channel.
•Polarity Automatic polarity detection and correction allows for automatic adjustment of wiring errors on all
•Pair Skew Reaction or transmission time in nanoseconds for the selected cable pair and given cable length.
•Test Now Press this button to begin the cable test.
Admin > Cable Test - Gigabit Ports > Copper Cable Extended Feature
Admin > Save Configuration
Admin > Save Configuration
The Save Configuration screen allows you to upload Switch configuration files to a TFTP server, or to download saved Switch configuration files from a TFTP server or from your computer via the HTTP interface.
Via TFTP Select this to upload to or download from a TFTP server. When you select this option, the following fields are displayed.
•UPGRADE Select this option to restore the Switch configuration from the file located on a TFTP server.
•TFTP Server Enter the TFTP Server IP Address that contains the source file to download.
•File Name Enter the name of the configuration file on the TFTP Server.
•BACKUP To back up the Switch configuration to a TFTP server, enter the TFTP server address.
•TFTP Server Enter the TFTP Server IP Address to which the configuration file will be saved.
•File Name Enter the name of the configuration file. The default is none (blank).
Via HTTP Select this to download a configuration file to the Switch from your computer using the HTTP interface. (HTTP only supports the upgrade operation. You cannot back up the configuration file using HTTP.) When you select this option, the following field is displayed.
•Source File Enter the name and path of the file or click Browse to locate the configuration file.
Click Save Settings to begin the download or upload.
After you have downloaded the configuration file to the Switch during an upgrade, the configuration file’s settings will not take effect until the system is rebooted.
45 |
