PAN-TILT-ZOOM Cameras PTZ, Restoring Factory Settings

RESTORING FACTORY SETTINGS

STEP 1. Click DEFAULT SETTINGS. This will restore the system to the original factory settings.

STEP 2. Click OK in the prompt.

IMPORTANT! Restoring factory settings will cause any settings you’ve made to the system to be removed! This includes recording and network setups along with passwords!

RESTARTING THE DVR (SOFT-RESET)

STEP 1. Click RESTART.

STEP 2. Click OK in the prompt. The system will perform a soft-reset and load to a live split-screen view.

UPGRADING THE FIRMWARE

STEP 1. Copy the firmware file to an empty USB flash drive. The firmware file should not be in a folder.

STEP 2. Connect the USB flash drive to the top USB port on the front panel of your system.

	STEP 3. Open the System Menu.
	STEP 4. Click FIRMWARE UPDATE.	PICTURE 6-7
	The system will scan the USB	PICTURE 6-7
	The system will scan the USB
	flash drive and begin updating the
	firmware. Do not remove the USB
	flash drive while the upgrade is
	taking place.
	STEP 5. Click CLOSE in the confirmation
	window. In the system prompt, click
	OK. The system will restart.

6.5 PAN-TILT-ZOOM CAMERAS (PTZ)

Use the PTZ Setup menu to configure settings for an optional PTZ camera.

NOTE! Consult the instruction manual of your PTZ camera for complete information about your camera, including protocol and baud rate.

The menu will only display four channels at a time. The pull-down menu in the upper left of the menu allows you to switch between groups of four channels; 1-4, 5-8, 9-12 and 13-16 - the number of channels being dependent on how many your DVR supports.

The PTZ setting options for each camera can be selected independently and are available below each camera’s channel number.

CHAPTER 6 ADVANCED FEATURES

PICTURE 6-8

Configuring a PTZ camera:

STEP 1. Connect a PTZ camera to the BNC and 485A (TX, +) and 485B (RX, -) ports and power outlet.

STEP 2. PROTOCOL Select PELCO-D or PELCO-P for the selected channel. STEP 3. BAUD RATE Select 1200, 2400, 4800, or 9600.

STEP 4. DATA BIT Select 5, 6, 7, or 8.

STEP 5. STOP BIT Select 1 or 2.

STEP 6. VERIFY Select ODD, EVEN, MARK, SPACE, or NONE.

STEP 7. ADDRESS Enter an address from 001~255 using the Virtual Keyboard. Refer to your PTZ camera`s instruction manual for further details.

STEP 8. Click APPLY and then click CLOSE in the confirmation window. STEP 9. Click EXIT in all menus until all windows are closed.

QS408, QS464, QS434, QS206 specifications

Q-See is a well-known brand in the security camera industry, offering a variety of surveillance systems that cater to different needs. Among their range, the QS408, QS206, QS464, and QS434 models stand out due to their advanced features, smart technology, and user-friendly design.

The Q-See QS408 is an 8-channel security camera system designed for comprehensive surveillance. It supports up to 4MP resolution, allowing users to capture crystal-clear images, ideal for monitoring large areas. One of its standout features is the remote viewing capability, which enables users to access live feeds and recorded footage from their smartphones or tablets. The system also includes motion detection alerts, which notify the user immediately when unusual activity is detected.

Next is the Q-See QS206, which is a more compact solution that provides 2 channels. This model targets users seeking efficient surveillance without the complexity of larger systems. It also offers 1080p HD resolution, ensuring video clarity for essential areas. Like the QS408, the QS206 supports remote access through mobile devices and has enhanced night vision capabilities, which provides clear images even in low light conditions.

The Q-See QS464 takes surveillance a step further with its 16-channel capabilities, perfect for larger premises. Supporting up to 5MP resolution, it features advanced H.265 video compression technology, which helps to save storage space without compromising video quality. This model also boasts an IR range for night vision, ensuring visibility up to 100 feet in total darkness. Additionally, its user-friendly interface allows for easy customization of settings.

Finally, the Q-See QS434 model is the perfect balance between functionality and affordability, offering 4 channels. It delivers 1080p video quality and is equipped with weather-resistant cameras, ensuring reliable outdoor performance. Motion detection, remote viewing, and a customizable recording schedule are key features that enhance its usability.

All four models utilize the latest in surveillance technology, like their weather-resistant designs, ensuring long-term performance regardless of environmental conditions. With a focus on ease of use, these models are equipped with intuitive software systems that allow for quick setup and seamless operation. Whether for residential or business use, Q-See's QS series provides a reliable and efficient method for enhancing security.

Q-See QS206 PAN-TILT-ZOOM Cameras PTZ, Restoring Factory Settings, Restarting the DVR SOFT-RESET

Models: QS408 QS464 QS434 QS206