QSD2014 User’s Manual
Area Selection:Press [▲,▼,◄◄ and ►►]
buttons to select a block and then press [SEL] button to set the block to detect motion. The area is detectable when it is clear, the area is not detectable when it is covered by shadow.
Press “Stop” button to disable all areas, and press “Quad” button to select all areas.
5.10Hard Drive Setup Hard Drive Setup
OVERWRITE ENABLED | [ON] |
MAXTOR STM250310AS |
|
MASTER HDD SIZE | 250203MB |
MASTER HDD USED | 124931MB 50% |
MASTER HDD FORMAT |
|
SLAVE HDD SIZE | N/A |
SLAVE HDD USED | N/A |
SLAVE HDD FORMAT |
|
() MOVE (SEL)SELECT (MENU)EXIT
OVERWRITE ENABLED:
ON: System overwrites oldest files when hard drive is full;
OFF: System stops recording when hard drive is full.
HDD SIZE:indicates the total capacity of the hard drive installed in the DVR.
HDD USED:indicates the space used in the hard disk drive for recording and the percent used.
HDD FORMAT:will erase all video and data on the installed hard drive and make it readable by the DVR. Note: You will be prompted for the password when formatting a hard drive and the default password is “111111”.
5.11 Miscellaneous Setup – Change Password
Miscellaneous Setup
CHANGE PASSWORD |
| |
SET TIME |
| |
[OFF] | ||
HIDDEN CHANNEL | ||
IMAGE PARAMETERS | [ CH1 ] | |
PASSWORD ENABLE | [ OFF] | |
KEYPAD TONES | [ ON ] | |
SEQ. DWELL TIME | [ 30 ] | |
VIDEO LOSS SOUND | [ ON ] |
() MOVE (SEL)SELECT (MENU)EXIT
CURRENT PASSWORD | - - - | ||
NEW | PASSWORD | [- - - - | |
COMFIRM PASSWORD | [- - - - | ||
|
|
|
|
This option allows you to change the system
password. The password must be six characters. All
keys can be used as a password key except the
[MENU] key, which is used to exit.
Enter the current password first, and then enter six characters as your new password, repeat the new password to confirm.
If you forget your password, please free feel to contact
9