Q-See QSD2014 user manual Audio Recording, Stopping Recording, Estimated Recording Time

QSD2014 User’s Manual

[●]：Indicates that the channel is being recorded.

[A-REC]：Indicates the current record schedule is set to NORMAL-RECORD mode.

[S-REC]：Indicates the current record schedule is set to SENSOR-RECORD mode.

[N-REC]：Indicates the current record schedule is set to NO-RECORD mode.

[39%]：Indicates the percentage of hard disk space used.

[M]：HDD info ([M] MASTER HDD；[S] SLAVE HDD).

6.2 Audio Recording

[]：indicates this video channel is assigned an audio port, and the audio output is on.

[]： indicates the audio output is off.

[]：indicates the audio is being recorded and the audio output is on.

You could press the [DOWN] button on front panel to mute the audio output, The audio input can be still recorded while the output is muted.

6.3 Stopping Recording

Press [■STOP] button to stop recording. If password protection function is enabled, system will prompt you to input password. Only correct password can stop recording process.

6.4 Estimated Recording Time

Estimated record time based on 160GB HDD

Standard	Quality	60fps	48fps	32fps	16fps	1fps
	Highest	62	78	116	232	3720
NTSC	High	88	110	165	330	5280
	Normal	107	134	201	401	6420
	Low	120	150	225	450	7200
Standard	Quality	50fps	36fps	24fps	12fps	1fps
	Highest	64	89	133	267	3200
PAL	High	90	125	188	375	4500
	Normal	110	153	229	458	5500
	Low	123	171	256	513	6150
				Unit： Hour

13