Firmware Update | Q-See QSD2216 specification

5.2.5 Firmware Update

5.2.5 Firmware Update

When the cursor moves to FIRMWARE UPDATE, please press enter button, and the firmware update window will appear.

Update Method: There are two methods to update the DVR firmware, USB (for USB thumb drives) and Network (not support)

USB update: create a new folder named “firmware” in the USB thumb drive’s root directory, copy the update file to the folder, and plug in the USB thumb drive. Enter the Firmware Update menu, select Update Start and press enter button, the system will start updating. When updating is finished, the window below will be displayed, please manually reboot the DVR.

17

Image 17

Q-See QSD2216 manual Firmware Update

Contents

Page Warranty and Service Safety PrecautionsAbout this document Before reading this document Strong recommendation on installation of the DVR unit CONTENTS 1. FEATURE AND FUNCTION 2.2 Function Control Area 2. UNIT DESCRIPTION OF FRONT PANEL2.1 Recording/Playing Control Buttons Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 2.3 Channel Choosing Control Area 3. REAR PANEL AND SYSTEM CONNECTION 3.2 Video and Audio Connection 3.3 Alarm Connection3.1 Back panel and connection terminals Alarm output There are processing to install the hard disk 3.4 Hard Disk Connection 5.1 SETUP MENU 4. REMOTE CONTROLLER5. SYSTEM SETUP Page 5.2.1 TIME/DATA SET 5.2 SYSTEM SETUP 5.2.2 HDD FORMAT SET 5.2.3 FACTORY RESET 5.2.4 Change Password 5.2.5 Firmware Update 5.3.1 CAMERA NAME SET 5.3 DISPLAY SETUP 5.3.2 COLOR SET 5.3.3. AUTO SEQUENCE SET 5.4 RECORD SETUP 5.4.1 AUDIO CH SET 5.4.2 REC CH SET 5.5 NETWORK SETUP 5.5.1. N/W ENABLE SET 5.5.2. MAC SET 5.6 SENSOR SETUP 2 When surveying objects in 50-100 meters area 5.6.1 Motion Detection settings1 When surveying nearby objects 2-10 meters 5.6.2 MOTION AREA SET 5.7 SCHEDULE SET 5.8 USB BACKUP 5.10 PTZ SET 5.9 STORAGE INFO 6.1 Start the DVR 6. Quick User Guideline6.2 Turn off the DVR 6.3 Normal Recording 6.6 Playback 6.4 Alarm Recording6.5 Time Recording 6.7 Search Play 6.9 Event Search 6.8 Time Search 6.10 Record Search 6.11 USB Backup 6.13 Zoom Operation 6.12 USB Update 6.15 PTZ Operation 6.14 Information Display Press the PTZ button one more time to exit from PTZ control 6.16 REMOTE CONTROLLER 7. USING THE NETWORK VIEWER 7.2 Viewer connect 7.1 SettingPlease click button, you will see the window below Enter the IP address and click “OK” button 7.4 Playback 7.3 Live play 7.6 File Play 7.5 Scandisk 7.7 Save to AVI 7.9 PTZ Control 7.8 Save to DVR 8. Main standard & parameter chart 9. Trouble shooting guide Q. Why cannot I access Network Set menu? A. Please stop record or play before you access these menuQ. I press record button, but the DVR does not start recording, why? Q. There is a movement, but the DVR does not start recording 10. Record Time Table ResolutionRec rate field/sec Picture quality 11.1 About Networks 11. Internet View/Playback Configurations11.2 Network Configurations Page Page Q-SEE Product Warranty Serial Number of Product Purchase Date Distributor Customer Information Card User’s NameMr./Mrs Company Name PostalAddress Postal code Phone Number E-mail Model Number of Product