Q-See QSD2216 manual Motion Detection settings, When surveying nearby objects 2-10 meters

ALARM ENABLE: alarm trigger switch, can be set to off, N.C(normal closed) or N.O(normal open). If users set it to off, the DVR will ignore the alarm input.

MOTION ENABLE: Motion alarm switch, can be set to ON or OFF. If set to off, the DVR will ignore the motion alarm.

MOTION LEVEL: motion sensitivity level, if the figure in the picture is small, please set to high or very high, default is normal.

BUZZER TIME: buzzer sound time when there is a sensor or motion alarm.

SENSE RECTIME: when a motion or sensor alarm is triggered, the recording time of DVR, default is 10 seconds.

Notice: Users should press the schedule button after setting up the parameters to activate the settings.

5.6.1Motion Detection settings

1)When surveying nearby objects (2-10 meters)

When in daytime, please set motion detection sensitivity to Normal level; when in night,

please set to low.

2) When surveying objects in 50-100 meters area

The objects 50-100 meters away will be quite small on the screen. When in daytime, please

set motion detection sensitivity to high level.

25