Rec Ch Set, Network Setup | Q-See QSD2216 specification

5.4.2REC CH SET

5.4.2REC CH SET

When the cursor moves to REC ch Set, please press enter button, the REC ch setup window will appear. This screen is different for CIF and FIELD modes . In FIELD mode, the window is illustrated as below, press UP and DOWN buttons to select channel and press LEFT or RIGHT button to change the setting, if the channel is set “OFF”, this channel will not record when in recording mode. If the resolution is set to "CIF ", the REC ch Setup window can not be setup.

5.4.3 RECORD LENGTH SET

To set the file package time in continuous time record mode

5.5 NETWORK SETUP

When the cursor moves to Network Set, press the Enter button, and the network setup window will appear. Please note if the Netviewer software is connected to the DVR. You cannot access this menu unless you close the Netviewer software.

22

Image 22

Q-See QSD2216 manual Rec Ch Set, Network Setup

Contents

Page About this document Safety PrecautionsWarranty and Service Strong recommendation on installation of the DVR unit Before reading this document CONTENTS 1. FEATURE AND FUNCTION 2.1 Recording/Playing Control Buttons Area 2. UNIT DESCRIPTION OF FRONT PANEL2.2 Function Control Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 3. REAR PANEL AND SYSTEM CONNECTION 2.3 Channel Choosing Control Area 3.1 Back panel and connection terminals 3.3 Alarm Connection3.2 Video and Audio Connection Alarm output 3.4 Hard Disk Connection There are processing to install the hard disk 5. SYSTEM SETUP 4. REMOTE CONTROLLER5.1 SETUP MENU Page 5.2 SYSTEM SETUP 5.2.1 TIME/DATA SET 5.2.3 FACTORY RESET 5.2.2 HDD FORMAT SET 5.2.4 Change Password 5.2.5 Firmware Update 5.3 DISPLAY SETUP 5.3.1 CAMERA NAME SET 5.3.2 COLOR SET 5.4 RECORD SETUP 5.3.3. AUTO SEQUENCE SET 5.4.1 AUDIO CH SET 5.5 NETWORK SETUP 5.4.2 REC CH SET 5.5.1. N/W ENABLE SET 5.6 SENSOR SETUP 5.5.2. MAC SET 1 When surveying nearby objects 2-10 meters 5.6.1 Motion Detection settings2 When surveying objects in 50-100 meters area 5.6.2 MOTION AREA SET 5.8 USB BACKUP 5.7 SCHEDULE SET 5.9 STORAGE INFO 5.10 PTZ SET 6.2 Turn off the DVR 6. Quick User Guideline6.1 Start the DVR 6.3 Normal Recording 6.5 Time Recording 6.4 Alarm Recording6.6 Playback 6.7 Search Play 6.8 Time Search 6.9 Event Search 6.10 Record Search 6.11 USB Backup 6.12 USB Update 6.13 Zoom Operation 6.14 Information Display 6.15 PTZ Operation Press the PTZ button one more time to exit from PTZ control 7. USING THE NETWORK VIEWER 6.16 REMOTE CONTROLLER Please click button, you will see the window below 7.1 Setting7.2 Viewer connect Enter the IP address and click “OK” button 7.3 Live play 7.4 Playback 7.5 Scandisk 7.6 File Play 7.7 Save to AVI 7.8 Save to DVR 7.9 PTZ Control 8. Main standard & parameter chart 9. Trouble shooting guide Q. I press record button, but the DVR does not start recording, why? A. Please stop record or play before you access these menuQ. Why cannot I access Network Set menu? Q. There is a movement, but the DVR does not start recording Rec rate field/sec Resolution10. Record Time Table Picture quality 11.2 Network Configurations 11. Internet View/Playback Configurations11.1 About Networks Page Page Q-SEE Product Warranty Address Postal code Phone Number E-mail Model Number of Product Customer Information Card User’s NameMr./Mrs Company Name PostalSerial Number of Product Purchase Date Distributor