Q-See QSDL503AD user manual P a g e

Models: QSDL503AD

1 15
Download 15 pages 7.99 Kb
Page 10
Image 10
8  P a g e

QSDL503AD USER MANUAL

Section 8: SETTING UP THE ADDITIONAL ACCESSORIES

To enable communication between the Main Control Unit and the various accessories, you must follow these steps:

1.To Connect the Main Control Unit to the Wireless Indoor Lighted Siren: Press the CODE button on the front of the Main Control Unit and the CODE button on the back of the Wireless Indoor Lighted Siren simultaneously. You will hear a beep from both the Main Control Unit and the Wireless Indoor Lighted Siren indicating that you have successfully enabled these two devices to communicate after approximately 30 seconds.

2.To Connect the Magnetic Window/Door Sensor Alarm: Turn the switch on the side of the Magnetic Window/Door Sensor Alarm to the “RF+Alarm” position. This will enable communication between the Magnetic Window/Door Sensor Alarm and the Wireless Indoor Siren which is connected to your Main Control Unit. You will hear a beep from both the Main Control Unit and the Wireless Indoor Lighted Siren indicating that you have successfully enabled communication between these devices after approximately 30 seconds

3.To Connect the Infrared Sensor to the Main Control Unit: Point the Infrared Sensor to a moving object until the LED blinks. This will enable communication between the Magnetic Window/Door Sensor Alarm and the Wireless Indoor Siren which is connected to your Main Control Unit. You will hear a beep from both the Main Control Unit and the Wireless Indoor Lighted Siren indicating that you have successfully enabled communication between these devices after approximately 30 seconds.

4.To Connect the Magnetic Code Controller to the Main Control Unit: Press the ALARM button on the Magnetic Code Controller. This will enable communication between the Magnetic Window/Door Sensor Alarm and the Wireless Indoor Siren which is connected to your Main Control Unit. You will hear a beep from both the Main Control Unit and the Wireless Indoor Lighted Siren indicating that you have successfully enabled communication between these devices after approximately 30 seconds.

8 P a g e

Page 10
Image 10
Q-See QSDL503AD user manual P a g e