VGA Resolution: Chose the configuration that best fits your monitor. Options are: VGA800*600, VGA1204*768, VGA1280x1024 and CVBS. NOTE: VGA is for VGA monitors while CVBS is for TV monitors connected using a BNC/RCA adaptor. Switching between VGA and CVBS will change the menu output mode. Please be sure to have the correct monitor on hand when changing output mode.
Language: Select your preferred menu language.
NOTE! When configuring your settings, you will always need to click Apply to save your current settings before closing the window with Exit otherwise your changes will be lost. You may click Exit or the close window box (X) in the upper right of the window to close without saving changes but an alert will pop up asking if you wish to save changes or not. Click OK to save changes or Cancel to continue without saving.You may select the Default button to restore your settings to those set at the factory.
IMPORTANT! After changing the Language or Video Format, the device will need to be restarted.
Date & Time Tab
Set date, time, time format and related configurations in this menu.
NTP Server: Using Network Time Protocol will keep your system’s clock current by allowing it to occasionally receive updates from the selected server.
DST Tab | PICTURE |
|
Allows your system to adjust for time changes due to Daylight Savings Time.
PICTURE 4-8
4.2 LIVE CONFIGURATION
Live configuration includes four submenus: Live, Main Monitor, Spot and Mask.
Live Tab
Use this menu to set camera names and adjust picture colors, brightness, hue saturation and contrast for optimal picture results.
You can individually name cameras by highlighting the field for each camera. A virtual keyboard will appear allowing you to enter characters, numbers and symbols with case sensitivity. ENTER will save the name and return to the LIVE menu. ESCAPE will exit the keyboard without saving.
PICTURE 4-9
You can configure the settings for image saturation, hue, brightness, contrast and colors individually by clicking on the Setting button for each individual camera or for all of them simultaneously by selecting the All button before making the settings.
PICTURE 4-10
Main Monitor Tab
Select the configuration of your display.
Split Mode allows you to choose from single view, 2x2, 2x3, 3x3 and 4x4 (QT426 only) views on a screen at one time. You can also select which channels will be displayed.
Channels can be grouped and the display will cycle between groups. Any individual channel can be shown in more than one group.
Dwell Time: This is the time interval the | PICTURE |
display will spend showing a group |
|
before moving on to the next group. |
|
NOTE! If viewing remotely on a computer with dual monitors, the display must 
be on the main monitor.
CHAPTER 4 MAIN MENU SETUP
16 | 17 |
