loss of 10% is barely audible, the resultant low damping factor will prevent the amplifier from fully controlling the peaks and dips in frequency response caused by speaker impedance variations. This will result in greater coloration and muddiness.
Cable | Wire | Cable | Power Loss, | Power Loss, | Damping | Damping |
Length | Gauge | Resistance | 8Ω Load | 4Ω Load | Factor, | Factor, |
|
|
|
|
| 8Ω Load | 4Ω Load |
5 ft. | 18 | 0.063Ω | 0.79% | 1.58% | 78 | 39 |
| 16 | 0.040Ω | 0.50% | 1.00% | 100 | 50 |
| 14 | 0.025Ω | 0.31% | 0.63% | 123 | 62 |
| 12 | 0.016Ω | 0.20% | 0.40% | 143 | 71 |
| 10 | 0.010Ω | 0.13% | 0.25% | 160 | 80 |
10 ft. | 18 | 0.126Ω | 1.58% | 3.15% | 48 | 24 |
| 16 | 0.080Ω | 1.00% | 2.00% | 67 | 33 |
| 14 | 0.050Ω | 0.63% | 1.25% | 89 | 44 |
| 12 | 0.032Ω | 0.40% | 0.80% | 111 | 56 |
| 10 | 0.020Ω | 0.25% | 0.50% | 133 | 67 |
20 ft. | 18 | 0.252Ω | 3.15% | 6.30% | 27 | 14 |
| 16 | 0.160Ω | 2.00% | 4.00% | 40 | 20 |
| 14 | 0.100Ω | 1.25% | 2.50% | 57 | 29 |
| 12 | 0.064Ω | 0.80% | 1.60% | 77 | 38 |
| 10 | 0.040Ω | 0.50% | 1.00% | 100 | 50 |
40 ft. | 18 | 0.504Ω | 6.30% | 12.60% | 15 | 7 |
| 16 | 0.320Ω | 4.00% | 8.00% | 22 | 11 |
| 14 | 0.200Ω | 2.50% | 5.00% | 33 | 17 |
| 12 | 0.128Ω | 1.60% | 3.20% | 48 | 24 |
| 10 | 0.080Ω | 1.00% | 2.00% | 67 | 33 |
| 8 | 0.050Ω | 0.63% | 1.25% | 89 | 44 |
80 ft. | 16 | 0.640Ω | 8.00% | 16.00% | 12 | 6 |
| 14 | 0.400Ω | 5.00% | 10.00% | 18 | 9 |
| 12 | 0.256Ω | 3.20% | 6.40% | 27 | 14 |
| 10 | 0.160Ω | 2.00% | 4.00% | 40 | 20 |
| 8 | 0.100Ω | 1.25% | 2.50% | 57 | 29 |
160 ft. | 14 | 0.800Ω | 10.00% | 20.00% | 10 | 5 |
| 12 | 0.512Ω | 6.40% | 12.80% | 14 | 7 |
| 10 | 0.320Ω | 4.00% | 8.00% | 22 | 11 |
| 8 | 0.200Ω | 2.50% | 5.00% | 33 | 17 |
320 ft. | 12 | 1.024Ω | 12.80% | 25.60% | 8 | 4 |
| 10 | 0.640Ω | 8.00% | 16.00% | 12 | 6 |
| 8 | 0.400Ω | 5.00% | 10.00% | 18 | 9 |
Table 3.69 Speaker Wire Table
14