QSC Audio user manual SPECIFICATIONSCX168, OUTPUT POWER in watts, Bridged Mono

SPECIFICATIONSCX168

OUTPUT POWER in watts

FTC: 8 ohms per channel (20 Hz.-20 kHz., 0.05% THD)

4 ohms per channel (20 Hz.-20 kHz., 0.1% THD)

EIA: 8 ohms (1 kHz, 0.1% THD, 1 channel driven)

4 ohms (1 kHz, 0.1% THD, 1 channel driven)

Bridged Mono:

16 ohms, 20 Hz.-20 kHz., 0.1% THD

8 ohms, 20 Hz.-20 kHz., 0.1% THD

DYNAMIC HEADROOM

DISTORTION

SMPTE-IM

Typical 20 Hz.-20 kHz., 10 dB below rated power Typical 1 kHz. and below, full rated power

FREQUENCY RESPONSE

DAMPING FACTOR

SIGNAL to NOISE (unweighted, 20 Hz.-20 kHz.)

VOLTAGE GAIN (gain control set to 0 dB attenuation)

INPUT SENSITIVITY for rated power into 8 ohms

INPUT CLIPPING, Vrms

INPUT IMPEDANCE

90

130

120(100 watts, all channels driven)

180(140 watts, all channels driven)

180

260

2 dB at 4 ohms

Less than 0.02%

Less than 0.05%

Less than 0.02%

+0.0, -3.0 dB: 8 Hz. to 50 kHz.

±0.2 dB: 20 Hz.-20 kHz.

>200 for 8 ohm load (5 kHz. and below)

-107 dB

26 dB (20 X)

1.35 Vrms

10 Vrms (+22 dBu)

10k ohms unbalanced , 20k ohms balanced

30