Quantum 3.5.1 manual StorNext Login Window

Chapter 2 StorNext GUI Overview

Accessing the StorNext GUI

Use this procedure to access the StorNext GUI.

1Open a Web browser.

Note: StorNext-supported browsers are:

•Internet Explorer 5.5, 6 and 7

•Netscape 7.x

•Mozilla 1.0 and later

•FireFox 1.5 and later or 2.0 and later

To ensure proper browser operation, all monitors must be set to display at a minimum resolution of 1073 x 768. If you use a popup blocker, be sure to enable pop-ups in order to ensure that the StorNext Configuration Wizard functions properly.

2In the browser’s Address field, type the full address of the machine and its port number, and then press Enter. For example: http:// <machine name>:<port number>. Use the name of the machine and port number you copied when you installed the StorNext software.

Note: Typically, the port number is 81. If port 81 is in use, use the next unused port number. (I.e., 82, 83, etc.)

After you enter the machine name and port number, the following window appears:

Figure 1 StorNext Login

Window

3In the User ID field, type admin and press TAB.

4In the Password field, type admin and click OK.

The initial StorNext GUI appears. A message asks you to start non- running components.

5Click OK to start the StorNext components. The StorNext GUI launches.

StorNext User’s Guide 7