Quantum 3.5.1 manual Modifying a File System

					Chapter 6 Managing the File System
					Working With File Systems
	6		Add disks to the file system as explained in Adding Disks on
			page 109.
	7		Configure stripe groups for the file system as explained in Adding a
			Stripe Group on page 114.
			Note:		Make sure that each stripe group is associated with no
					more than one affinity when using disk-to-disk migration.
	8		Make the file system as described in Making a File System on
			page 106.
	9		Start the file system as described in Starting and Stopping the File
			System on page 107.
		10 Mount the file system as described in Mounting or Unmounting a
			File System on page 108.
	11		Add affinities to the file system as described in Modifying an Affinity
			on page 131.
			Note:		When using disk-to-disk relocation you can define a
					maximum of two affinities per file system.
		This section describes how to modify an existing file system’s
Modifying a File System
		configuration. Changes to an existing file system include adding or
		modifying a stripe group, adding disks, adding affinities, and
		performance tuning.
		Note:		This procedure assumes the file system exists with at least two
				stripe groups.
	1		Unmount the file system as described in Mounting or Unmounting a
			File System on page 108.
	2		Stop the file system as described in Starting and Stopping the File
			System on page 107.
	3		Make the appropriate changes to the file system. For more
			information, refer to:
			•	Making Global Changes on page 100

StorNext User’s Guide 93