4 | Basic Operation Instructions | DX Scanner |
INTRODUCTION
Welcome to Quantum Rehab, a division of Pride Mobility Products Corporation (Pride). Quantum Rehab is dedicated to the customization of power chairs for users with advanced rehabilitation and mobility issues. Quantum Rehab also expands possibilities for enhanced healthcare attendant control over power chair functions to provide a secondary level of support for our customers where necessary.
Dynamic DX Scanner Control
The Dynamic DX Scanner Control allows the power chair user to control drive modes, actuators, and secondary remote controls.
This manual is designed to explain basic operation of the following functions available with the Scanner:
1.Select Mode
-Allows the user to choose one of three different
2.Drive Mode
-Allows the user to control the speed and direction of the power chair.
3.Seat Mode
-Allows the user to select and adjust one of four seat actuators.
4.Environmental Mode
-Allows the user to select and control the attached environmental control or communication device.
5.Scanning Speed Adjustment
-The user can adjust the speed with which the Scanner cycles through the available options.
Figure 1 provides information on the Scanner Control components and connections. Use this diagram to familiarize yourself with the function and location of each component before using the Dynamic DX Scanner Control.
