DX Scanner | Basic Operation Instructions | 5 |
Module Status LED
Indicates the status of the Scanner; flashes when there is a fault within the Scanner (not the power chair).
Drive Mode LED
Indicates if the Drive Mode is powered on or off.
Seating Status LED
Indicates if actuator control is powered on or off.
Seating Mode LED
Indicates if Seating Mode is powered on or off.
Environmental Mode LED
Indicates if Environmental Mode is powered on or off.
Direction LEDs
A set of 8 LEDs which indicate drive direction or function.
M
T
BACK OF MODULE
Select Switch Socket
Used to connect a switch that can control all functions of the Scanner.
DXBUS Socket
Used as an interface to connect the DX Scanner to other DX compatible controls.
Environmental Socket
Used to connect an environmental control or communication device to the Scanner.
